0.25-6.0 ghz high dynamic range amplifier page 1 of 6 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. cmm6004-ah february 2007 - rev 10-feb-07 features 0.25 to 6.0 ghz frequency range +41 dbm output ip3 1.7 db noise figure 15 db gain +23 dbm p1db lga package single power supply single input matching supply voltage rf input power* storage temperature junction temperature operating temperature thermal resistance +6.0 v +20 dbm -55oc to 125oc 150oc -40oc to +85oc 50oc/w absolute maximum ratings wireless local loop transmit and receive unh transmit and receive dual band 802.11 wlan wimax lan applications description parameter condition min typ max units frequency range 0.25 6.0 ghz gain externally matched 13.5 15 db input return loss externally matched -10 db output ip3 38 41 dbm noise figure 1.7 db output p1db 23.0 dbm operating current range 120 150 180 ma supply voltage 5.0 v unless otherwise specified, the following specifications are guaranteed at room temperature in a mimix test fixture. notes: 1. t = 25oc, vdd = 5v, frequency = 2 ghz, 50 ohm system. 2. oip3 measured with two tones at output power of 5 dbm/tone separated by 10 mhz. electrical characteristics (t=25oc) the cmm6004-ah is a high dynamic range amplifier designed for applications operating within the 0.25 to 6.0 ghz frequency range. it is an ideal solution for numerous transmit and receive functions in wireless local loop (wll) and unh applications where high linearity is required. the amplifier has the flexibility of being optimized for a number of wireless applications. it is an ideal solution when used as a driver amplifier in applications including cellular and pcs (personal communications services) operating from 0.8 to 2.2 ghz; mmds (multichannel multipoint distribution systems) operating from 2.2 to 2.7 ghz; wlan (wireless lan) operating at 2.4 ghz; wll (wireless local loop) operating at 3.5 ghz; and hiperlan (high performance lan) and u-nii (unlicensed national information infrastructure) operating from 5.0 to 6.0 ghz. the cmm6004-ah is packaged in a low-cost, space efficient, land grid array (lga) package which provides excellent electrical stability and low thermal resistance. all devices are 100% rf and dc tested. with single input matching the part simplifies design by keeping board space and cost to a minimum. functional block diagram all other pins grounded (bias) output pin 1 input operation of this device above any of these parameters may cause permanent damage. *operation with more than 10 dbm of rf input power may cause 2 db degradation in oip3 performance.
page 2 of 6 application circuit (836 mhz) typical performance 0.25-6.0 ghz high dynamic range amplifier cmm6004-ah frequency gain input return loss output return loss oip3 noise figure bias 836 mhz 18 db -23 db -14 db 40 dbm 1.75 db vds = 5v, id = 175 ma rf out uuuu uuuu c3 4.7 pf c4 100 pf l2 22 nh vcc 5v c2 1.0 pf l1 6.8 nh rf in 836 mhz cmm6004-ah t1 50 ? 20 t1 50 ? 30 output matching network input matching network c1 100 pf circuit board parts list part reference type designator description inductor l1 0603, 6.8 nh inductor l2 0603, 22 nh capacitor c1, c4 smd 0805 npo, 100 pf capacitor c2 0603, 1 pf capacitor c3 smd 0805, 50v 0.25 pf 4.7 pf ip3 measured with 2 tones at an output power of 5 dbm/tone separated by 10 mhz gain, input return loss and output return loss vs frequency typical performance (50 ohm system) mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 10-feb-07
page 3 of 6 application circuit (2.1 ghz) typical performance 0.25-6.0 ghz high dynamic range amplifier cmm6004-ah frequency gain input return loss output return loss oip3 noise figure bias 2.1 ghz 15.8 db -14 db -16.5 db 40 dbm 2.95 db vds = 5v, id = 175 ma circuit board parts list part reference type designator description inductor l1 0603, 0.3, 1.8 nh inductor l2 0603, 22 nh capacitor c1, c4 smd 0805 npo, 100 pf capacitor c2 0603, 1 pf capacitor c3 smd 0603, 50v 0.1 pf 1.5 pf rf out uuuu uuuu c3 1.5 pf c4 100 pf l2 22 nh vcc 5v c2 1.0 pf l1 1.8 nh rf in 2.1 ghz cmm6004-ah t1 50 ? 33 output matching network input matching network c1 100 pf ip3 measured with 2 tones at an output power of 5 dbm/tone separated by 10 mhz gain, input return loss and output return loss vs frequency typical performance (50 ohm system) mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 10-feb-07
page 4 of 6 application circuit (5.8 ghz) typical performance 0.25-6.0 ghz high dynamic range amplifier cmm6004-ah frequency gain input return loss output return loss oip3 noise figure bias 5.8 ghz 10.5 db -11.5 db -17.2 db 40 dbm 3.8 db vds = 5v, id = 175 ma rf out uuuu c4 100 pf l1 6.8 nh vcc 5v c3 1.0 pf c2 3.9 pf rf in 5.8 ghz cmm6004-ah t1 50 ? 110 t1 50 ? 125 input matching network c1 100 pf circuit board parts list part reference type designator description inductor l1 0603, 6.8 nh capacitor c1, c4 smd 0805 npo, 100 pf capacitor c2 smd 0805, 3.9 pf capacitor c3 0603, 1 pf gain vs temperature @ 5.8 ghz ip3 vs temperature @ 5.8 ghz ip3 measured with 2 tones at an output power of 5 dbm/tone separated by 10 mhz gain, input return loss and output return loss vs frequency typical performance (50 ohm system) mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 10-feb-07
page 5 of 6 physical dimensions mounting recommendation 0.25-6.0 ghz high dynamic range amplifier cmm6004-ah dimensions in millimeters/inches *board substrate: *ground vias are critical to rf and thermal grounding considerations. ro-4003 thickness = 31 mil mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 10-feb-07
page 6 of 6 0.25-6.0 ghz high dynamic range amplifier cmm6004-ah ordering information part number for ordering package cmm6004-ah-0000 rohs compliant lga surface-mount power package in bulk quantity cmm6004-ah-000t rohs compliant lga surface-mount power package in tape and reel pb-cmm6004-ah-00a0 evaluation board with sma connectors for 900 mhz PB-CMM6004-AH-00B0 evaluation board with sma connectors for 1.9 ghz pb-cmm6004-ah-00c0 evaluation board with sma connectors for 5.8 ghz handling and assembly information do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matt tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: we also offer this product with snpb (tin-lead) or nipdau plating. please contact your regional sales manager for more information regarding different plating types. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. february 2007 - rev 10-feb-07
|
